ARC Visualizations

Participant 1

Initial description: Start from the green and touch each other colored box once in a straight line, and then to the edge.

Final description: Start from the green and touch each other colored box once in a straight line, and then to the edge.

Participant 2

Initial description: Begin with the green square and fill squares with green until run into another color. Turn and continue toward the next colored square. Continue until green reaches the edge of the grid

Final description: Begin with the green square and fill squares with green until run into another color. Turn and continue toward the next colored square. Continue until green reaches the edge of the grid

Participant 3

Initial description: Grid will be the same size. Put down green squares horizontally from the first green square until you hit the nearest pink/blue square. From there, go up/down (no diagonals) hitting alternating colored squares.

Final description: Grid will be the same size. Make an unbroken green line, starting with the initial green square. Go horizontally until you hit a colored square, then up, right, up, right, hitting a colored square - never make a diagonal line, always horizontal/vertical. After the last colored square, make sure to keep going in the same direction until you hit the edge of the grid.

Participant 4

Initial description: Green squares move right until it hits a block, and bounches down until it hits another block (which there are none).

Final description: The green moves right until it hits a block, then continues on a linear path until it hits the next block, and so forth, and so forth.

Participant 5

Initial description: Creat the grid that is 10 x 12, then select green and copy to 1st row, The select pink for 3 squares, then select blue for 3 squares. pink and blue are on diagonals

Final description: I transformed the output correctly the first time and have done 3 more. The rule was similar to example output 3 where we have individual squares of three colors separated on diagonals.

Participant 6

Initial description: I felt very good

Final description: good

Participant 7

Initial description: The green block would fill from left to right, stopping when it hit other colored blocks which direct the green fill down or right for magenta or up or right for cyan

Final description: The green block would fill from left to right, stopping when it hit other colored blocks which direct the green fill down or right for magenta or up or right for cyan

Participant 8

Initial description: hmm the rule to transform the input to the output is by coloring one square at a time to match the input eh?

Final description: connecting with the green to the rest of the colors and leaving the colors where they were put in the input

Participant 9

Initial description: I started with the green given box and followed the path in green between the light blue and pink boxes

Final description: I started with the green given box and followed the path in green between the light blue and pink boxes

Participant 10

Initial description: changed height to 10 and width to 12. Staggered pink colors and light blue colors. Entered one block of green.

Final description: change height to 10 and width to 12. Stagger pink and blue colors.

Participant 11

Initial description: I wanted to make all the blocks touch while still allowing the green line to touch both east and west.

Final description: I wanted to make all the blocks touch while still allowing the green line to touch both east and west.

Participant 12

Initial description: The green squares extend to the left until they hit another square. If it hits the blue square it goes left and if it hits a purple square it turns right and continues.

Final description: The green squares extend to the left until they hit another square. If it hits the blue square it goes left and if it hits a purple square it turns right and continues.