Participant 1

Initial description: Fill the inside of the square with red, and exit the square, going to the edge the opposite way the interior square was pointing.

Final description: Fill the inside of the square with red, and exit the square, going to the edge the opposite way the interior square was pointing.


Attempt 1: Correct

Participant 2

Initial description: a red line of blocks run from the side the inner part of the gray section seems to be pointing to, down into and filling the gray "box"

Final description: Orange squares run from the side the inner part of the gray box appears to be pointing to, and down into and filling the gray box


Attempt 1: Incorrect
Attempt 2: Correct

Participant 3

Initial description: This is still on resetting the grid. That's what I thought anyway. This again to me is a simple match grid. Only this time I had to plot the red boxes just one way.

Final description: This is still on resetting the grid. That's what I thought anyway. This again to me is a simple match grid. Only this time I had to plot the red boxes just one way.


Attempt 1: Correct

Participant 4

Initial description: Fill the gray boxes with red and add red across the top of the gray box going in the direction of the longest side of the gray box.

Final description: Fill the gray boxes with red and add red across the top of the gray box going in the direction of the longest side of the gray box.


Attempt 1: Correct

Participant 5

Initial description: You trace the red based on the facing of the grey

Final description: You trace the red based on the facing of the grey


Attempt 1: Correct

Participant 6

Initial description: i was following the examples and just mimicked

Final description: not sure what i was doing wrong on this one


Attempt 1: Incorrect
Attempt 2: Incorrect
Attempt 3: Incorrect

Participant 7

Initial description: Recreate the sample input by filling it in with the red squares, till it reaches the end of the grid display.

Final description: Recreate the sample input by filling it in with the red squares, till it reaches the end of the grid display.


Attempt 1: Correct

Participant 8

Initial description: The red line went over the side that had 2 gray blocks

Final description: The red line went over the side that had 2 gray blocks


Attempt 1: Correct

Participant 9

Initial description: Copy the original gray boxes over and fill it in with orange in the box and up over the side with 2 gray boxes to the edge of the grid.

Final description: Copy the original gray boxes over and fill it in with orange in the box and up over the side with 2 gray boxes to the edge of the grid.


Attempt 1: Correct

Participant 10

Initial description: based on the instruction

Final description: I am done the work as per the instruction given


Attempt 1: Incorrect
Attempt 2: Incorrect
Attempt 3: Incorrect

Participant 11

Initial description: Create two hollow rectangular shapes with a missing piece on the top right corner.

Final description: Create open rectangular shapes in gray and fill in the hollow part with red, have the edge extend to the edge of the grid, but only on the opposite side of the hollow part.


Attempt 1: Incorrect
Attempt 2: Correct

Participant 12

Initial description: Fill the area in the grey shapes and with red and carry the red to the end of the grid following the direction of the curve.

Final description: Fill the area in the grey shapes and with red and carry the red to the end of the grid following the direction of the curve.


Attempt 1: Correct

Participant 13

Initial description: The blank spaces in the grey rectangles/squares are filled with a red shape with a long tail going to the edge of the chart, the direction dependent on which way the blank spaces were "facing".

Final description: The blank spaces in the grey rectangles/squares are filled with a red shape with a long tail going to the edge of the chart, the direction dependent on which way the blank spaces were "facing".


Attempt 1: Correct

Participant 14

Initial description: The shapes from the input are filled with red that moves outward until it hits the farthest away edge.

Final description: The inside of the input shapes are filled with red. This color continues outward in the direction of the block that sticks out from the main shape.


Attempt 1: Incorrect
Attempt 2: Incorrect
Attempt 3: Correct